Industry News

Sisecam's COP31 Study Puts a Number on Glass: 13.1 Million Tons of Avoided CO₂ If High-Performance Glazing Scales in One City

November 15, 2026

high-performance glazingbuilding envelopesustainabilityCOP31energy codessolar control glassclimate adaptation
← All Industry News
Sisecam's COP31 Study Puts a Number on Glass: 13.1 Million Tons of Avoided CO₂ If High-Performance Glazing Scales in One City

At COP31, Şişecam released joint research with METU-GÜNAM projecting the energy, emissions, and cost impact of high-performance glass through 2050. The headline numbers reframe glazing from an aesthetic choice into a measurable climate-adaptation lever for architects, developers, and envelope consultants.

A climate pitch with hard numbers attached

Glass manufacturers have been making the energy-efficiency case for coated, high-performance glazing for years. What came out of COP31 last week is different: a modeled, city-scale projection of what that glass can actually displace in tons of CO₂ and euros per ton of carbon avoided.

The findings of a joint study by Şişecam and METU-GÜNAM (the Middle East Technical University Center for Solar Energy Research and Applications) were shared with COP31 participants for the first time. The study examined how different glazing configurations affect energy consumption and emissions in residential buildings under varying climate conditions, using simulations and long-term projections through 2050.

The standout figures for specifiers:

  • If high-performance glass is widely adopted in residential buildings in Istanbul, 13.1 million tons of carbon emissions could be prevented by 2050, and with proper prioritization the unit cost of carbon reduction can drop to as low as 11 euros per ton.
  • The research concluded that high-performance coated glass can act as a major lever in helping cities achieve their 2050 climate targets by reducing the energy consumption of buildings.

At roughly €11 per ton, glazing upgrades begin to look competitive against other decarbonization levers that typically cost multiples of that figure — a point that matters for owners weighing envelope capex against mechanical system upgrades or onsite renewables.

Why the cooling story is driving this

The research reframes the business case around a shift most European and North American specifiers are already feeling on project briefs: cooling load is the growth problem, not heating.

While heating demand is expected to decline over time, cooling requirements are projected to increase significantly, making building-envelope performance more critical than ever. High-performance glass can help manage this changing balance by reducing solar heat gains and limiting overheating during hotter periods while maintaining strong thermal insulation year-round.

Southern European countries including Spain are among the regions most exposed to rising temperatures and increasingly frequent heatwaves, and high-performance glazing can help reduce solar heat gains, lower cooling demand, improve indoor comfort and support long-term decarbonization goals, particularly in buildings with ageing and inefficient windows.

For North American specifiers watching ASHRAE 90.1 and IECC pathways tighten SHGC limits in warmer zones, the Sisecam/METU-GÜNAM dataset provides a useful external benchmark to cite in design narratives and LEED/EN 15978 reporting.

Practical implications for architects, GCs, and manufacturers

For architects and envelope consultants. The study pushes glazing performance from a U-value conversation into a whole-building emissions conversation. Expect clients — particularly institutional owners with 2050 net-zero commitments — to start asking for lifecycle carbon avoidance tied to the glass package, not just center-of-glass performance. Specifiers should be ready with SHGC, LSG (light-to-solar gain) and dynamic solar-control scenarios modeled for the project's climate decade-by-decade, not just TMY data.

For general contractors and developers. The €11/ton figure is a procurement weapon. When high-performance glazing upgrades can be framed as among the cheapest tons of avoided CO₂ on the project, they become easier to defend against value-engineering pressure — especially on multifamily and mixed-use work where envelope-first strategies outperform late-stage mechanical fixes.

For manufacturers and fabricators. Expect more OEM-funded climate modeling to accompany product launches. Sisecam used COP31 as the stage; competitors in the coated and solar-control space (Guardian, Vitro, AGC, Saint-Gobain, NSG) will need comparable datasets to stay credible in European and emerging-market tenders. Tools like EnergyPlus-based simulation and EPD-backed carbon math are becoming table stakes.

For the wider envelope conversation. The study lands in the same week that cooling-driven envelope performance is showing up across multiple industry announcements — from retrofit overclad research to BIPV-integrated curtain walls. Glass is no longer being positioned as a passive aperture but as an active climate-adaptation component with a quantifiable carbon payback.

The spec-sheet takeaway

The Sisecam/METU-GÜNAM numbers are directionally useful even outside Istanbul and Madrid. Any project team modeling a 25-year building against a hotter climate baseline can now point to peer-reviewed, OEM-sponsored data showing that glazing selection is one of the lowest-cost carbon-abatement levers available at the envelope. Expect that framing to show up in RFPs, ESG disclosures, and design competition submissions over the next 12 months.

Ready to start your project?
Submit your project and connect with qualified local contractors.
Submit a Project