A Jupiter, Florida factory using compression molding, robotic arms, and pultrusion lines just scaled up a composite structural building system to 6,000 apartment units per year. For architects and envelope consultants, RENCO's TIME-recognized interlocking block system raises new questions about how windows, cladding, and air barriers attach to a non-concrete, non-CMU shell.
A new structural substrate reaches commercial scale
RENCO USA, a Florida-based maker of composite structural components, has been named to TIME's 2026 Best Inventions list and simultaneously opened a fully automated manufacturing facility in Jupiter, Florida. The combination of editorial validation and manufacturing capacity matters because the plant has capacity to manufacture enough components for the equivalent of around 6,000 apartment units a year — a volume large enough to start showing up in real multifamily specifications across the Southeast.
For architects, GCs, and envelope consultants who have spent careers detailing openings into CMU, cast-in-place concrete, light-gauge steel, or wood framing, RENCO introduces a different substrate behavior that affects how windows, doors, flashing, and cladding anchors get specified.
What RENCO actually is
RENCO is not a cladding or an insulation product. It is a load-bearing structural system. Modern construction builds almost everything out of wood, steel, and concrete. RenCo introduces a fourth material: mineral-composite parts that interlock like Lego blocks. An unskilled crew can raise a structural shell in weeks instead of months, and the finished building resists fire, mold, and Category 5 hurricane winds. Approved under the International Building Code, RenCo positions itself as the first new structural building system since the invention of reinforced concrete more than a century ago.
The material itself has implications for embodied-carbon conversations happening on every data center and multifamily pursuit right now. The components are said to be made from a proprietary composite material combining glass fibres, resin and naturally occurring minerals and are designed to interlock and be bonded together on site. According to the company's founder, RENCO is composite building material made from recycled plastic and recycled glass, which is relevant for projects chasing EPD-driven procurement thresholds.
The manufacturing playbook
The Jupiter facility is the production side of the story. The facility uses compression moulding machines, robotic arms and pultrusion lines to manufacture the structural elements that make up Renco's building system. That is a very different industrial model from a precast yard or a stick-frame panelization shop, and it tracks with the broader move toward factory-controlled building components that envelope specifiers have been seeing from window, door, and curtain wall OEMs.
The field-labor claim is the one GCs will stress-test first. Renco has already used the system on a 96-unit apartment development in Palm Springs, Florida. According to the company, a crew of 11 workers erected each of the development's four three-storey structural shells in around eight weeks. Renco said its colour-coded assembly plans allow components to be installed without on-site cutting, reducing material waste and simplifying construction.
Why this matters for openings and envelope scopes
A new structural substrate changes the opening detail. Here is where the implications land for professionals reading spec sheets:
- Rough opening tolerances. Interlocking molded components typically hold tighter tolerances than CMU or cast-in-place concrete. That changes the shim and sealant budget for window and door installers and may compress the acceptable range for flange-mounted or clip-anchored systems.
- Anchorage. Fastener pull-out values for a mineral-composite substrate are not the same as concrete or CMU. Curtain wall and storefront engineers will need manufacturer-specific anchorage data before they can stamp attachment calcs.
- Air and water control layers. The joint pattern between interlocking blocks becomes the primary air-barrier substrate. Transition details to window flanges, door frames, and through-wall flashing will need to be redrawn for this joint geometry.
- Hurricane and impact zones. With Category 5 wind ratings on the structure, the weak link becomes the fenestration. Expect specifications for impact-rated glazing, reinforced frames, and tested anchorage to tighten on RENCO projects, particularly in Florida HVHZ jurisdictions.
- Fire-rated openings. A fire-resistant structural shell shifts the compliance burden onto doors, glazing assemblies, and penetration seals.
The market signal
The TIME recognition is marketing, but the production capacity is the operational news. The company is positioning the technology as a potential response to housing shortages and construction labour constraints by shifting more of the building process into automated manufacturing. That framing — automated factories compensating for scarce skilled trades — is the same thesis driving investment at Pella, YKK AP, and others on the fenestration side.
For envelope consultants and specifiers, the practical takeaway is to request RENCO's attachment, air-barrier, and opening-condition details now, before a developer puts the system in front of you as a fait accompli on a multifamily pursuit. The spec library needs a new chapter.

